3.1.4 Removing the rear panel
(See Fig.8)
• Remove the metal cover.
(1) From the back side of the main body, remove the fifteen
screws D and screw E attaching the rear panel.
(2) Remove the sections a toward this side and remove the
rear panel from the sections b.
3.1.5 Removing the video board
(See Fig.9)
• Remove the metal cover and rear panel.
From the back side of the main body, disconnect the card wire
from the connector
CN101
on the video board.
1-8 (No.MB455)
Rear panel
D
a
D
b
D
Fig.8
CN101
Video board
Fig.9
D
a
E
b