JVC HX-D7 Service Manual page 7

3.1.3 Removing the fan motor
(See Figs.6 and 7)
• Remove the metal cover.
(1) From the top side of the main body, disconnect the wire
from the connector FAN101
Fig.6.)
(2) From the back side of the main body, remove the two
screws C attaching the fan motor to the rear panel. (See
Fig.7.)
(3) Take out the fan motor from the main body.
on the amplifier board. (See
FAN101
Fan motor
Amplifier board
Fig.6
Fan motor
C
Fig.7
Rear panel
(No.MB455)1-7