Asus P10S-V/4L User Manual page 28

5. Close the load plate (A), ensuring
that the front edge of the load plate
slides under the retention lock (B)
then push down the load lever (C).
6. Insert the load lever under the retention tab to remove the PnP cap from the CPU
socket.
7. Apply some Thermal Interface Material
to the exposed area of the CPU that the
heatsink will be in contact with, ensuring
that it is evenly spread in a thin layer.
Some heatsinks come with pre-
applied Thermal Interface Material. If
so, skip this step.
The Thermal Interface Material is
toxic and inedible. DO NOT eat it. If
it gets into your eyes or touches your
skin, wash it off immediately and seek
professional medical help.
2-10
Load lever
Load lever
Retention tab
Chapter 2: Hardware Information
Retention
lock