Volvo XC90 Owner's Manual page 90

03 Your driving environment
Lighting
NOTE
•
The use of daytime running lights is
mandatory in Canada.
•
Continuous high beams cannot be acti-
vated when the headlight switch is in
position or 0. High beam flash will
03
function in these positions.
Active Bending Lights (ABL)*
Headlight pattern with the Active Bending Light
function deactivated (left) and activated (right)
When this function is activated, the headlight
beams adjust laterally to help light up a curve
according to movements of the steering wheel
(see the right-pointing beam in the illustration).
1 The factory default setting is on.
*
90
Option/accessory, for more information, see Introduction.
1
ABL is activated automatically
engine is started and it can be deactivated/
reactivated in the menu system under
MY CAR Settings Car settings
settings Active bending lights.
NOTE
This function is only active in twilight or dark
conditions, and only when the vehicle is in
motion.
If a fault should occur in the system, the symbol
will illuminate and a message will be displayed
as shown in the table.
I n f o r m a t i o n P r o v i d e d b y :
when the
Symbol
Light
Display Explana-
tion
Headlamp The system
is not func-
failure
tioning
Service
properly and
required
should be
inspected/
repaired by
a trained
and qualified
Volvo serv-
ice techni-
cian.