Volvo XC90 Owner's Manual page 211

press on the number key pad on the cen-
ter console to switch to manual tuning, which
enables you to select a frequency from the
complete list of all radio frequencies available
on the currently selected waveband. In other
words, in manual tuning mode, turning TUNE
one step will change from e.g., 93.3 to 93.5,
etc.).
To manually tune a station:
1. Press RADIO. Continue pressing this but-
ton to toggle to the desired waveband
AM FM1
( , , etc.) and wait for several sec-
onds or press OK/MENU to confirm.
2. Turn TUNE to select a frequency
NOTE
The radio is initially set to automatically
search for stations in the area in which you
are driving (see the preceding section, "List
of stations").
However, if you have switched to manual
tuning (by pressing on the number key
pad on the center console while the list of
stations is displayed), the radio will remain
in manual tuning mode the next time it is
switched on. To switch back to "list of sta-
tions" mode, turn TUNE one step (to display
the full list of stations) and press
Please note that if you press
list of stations is not displayed, this will acti-
vate the INFO function (see page 207 for
more information about this function).
Storing preset stations
Ten preset stations can be stored for each
waveband ( AM , FM1 , etc.).
Stored preset stations are selected using the
number key buttons on the center console.
Manually storing preset stations
1. Tune to a station (see "Selecting a sta-
tion").
2. Hold in one of the number key buttons.
> The sound will be muted for several sec-
onds and when it returns, the station has
I n f o r m a t i o n P r o v i d e d b y :
05 Infotainment
been stored on the number key button
used.
A list of preset stations can be displayed. This
function can be activated/deactivated in AM/
FM mode in FM menu
AM menu Show presets
Scan
The function automatically searches the cur-
rent waveband for radio stations. When a sta-
tion is found, it is played for several seconds
before scanning is resumed. While the station
.
is playing it can be stored as a preset in the
usual way (see "Manually storing preset sta-
when the
tions").
±
To start scanning in AM/FM mode, go to
FM menu
Scan.
Stop station scanning by pressing EXIT.
NOTE
Storing a station interrupts the SCAN func-
tion.
Radio text
Some stations transmit information on pro-
gram content, artists, etc. This information can
be shown on the display.
Radio
Show presets or in
Scan or in AM menu
211
05
``