Dell Vostro 220 Service Manual page 105

1 Align the notch on the bottom of the module with the crossbar in the
.
1
3
2 Insert the module into the connector until the module snaps into position.
3 Follow the procedure in "After Working on Your Computer" on page 45.
4 When the message appears stating that memory size has changed, press
5 Log on to your computer.
Downloaded from www.Manualslib.com
connector.
1
cutouts (2)
notch
NOTICE:
To avoid damage to the memory module, press the module straight down
into the connector while you apply equal force to each end of the module.
If you insert the module correctly, the securing clips snap into the cutouts
at each end of the module.
<F1> to continue.
manuals search engine
3
2
2 memory module
4 crossbar
4
Memory Module(s)
105