Table of Contents
Advertisement
38
TH - P19A
with power management function are as follows,
STATUS
On
Stand-by
Suspend
Off
Power switch off is less than 2W at 230V
3.5
Display identification
Use DDC2B and EDID 3.0 structure 1.3.
4.0
Visual characteristics
4.1
Test conditions
Unless otherwise specified, this specification is defined
under the following conditions.
(1) Input signal
(2) Luminance setting: Set contrast to 50 % and brightness to100 % with
(3) Warm-up: more than 30 minutes after power on with signal supplied.
(4) Ambient light: 400 - 600 lux.
(5) Ambient temperature: 25 +/-5°C
4.2
Brightness output
Video signal : 0.7V +/- 2%; White pattern, 1280x 1024 80K/75Hz
Setting to user color and video mode.
Should be measured center of screen.
4.3
Dimming range
2004-11-04
Kevin Chen
GENERAL PRODUCT SPECIFICATION
Horizontal
Pulse
No Pulse
Pulse
No Pulse
: As defined in 3.3,
Signal sources must have 75 ohms output impedance.
full white pattern.
Brightness control
Contrast control
Max
19" TFT SXGA LCD CMTR
TYPE: EG3S50/91
BRAND: THUNIS
2004-11-04
Vertical
Power Spec
Pulse
< 40W
Pulse
< 2 W
No Pulse
< 2 W
No Pulse
< 2 W
Light output
Max
>=
8639 000 16042
12
590
LED
Green
Amber
Amber
Amber
2
200
cd/m
8
Advertisement
Table of Contents
