Safety Features; Safety Lock / System Lock - Miele KM 611 Series Operating And Installation Instructions

Safety lock / System lock

The system lock and safety lock are
deactivated if there is an interruption
to the power supply.
Your cooktop is equipped with a system
lock and a safety lock to prevent the
cooktop and the cooking zones being
switched on or any settings being
altered.
The system lock is activated when the
cooktop is switched off. When it is
activated, the cooktop cannot be
switched on and the timer cannot be
used. The cooktop is programmed so
that the system lock must be activated
manually. It can be programmed to be
activated automatically 5 minutes after
the cooktop has been switched off if
the system lock is not manually
activated first (see "Programming").
The safety lock is set when the
cooktop is switched on. When the
safety lock is activated:
– The power settings for the cooking
zones and the timer settings cannot
be changed.
– The cooking zones, entire cooktop
and the timer can be switched off,
but once switched off cannot be
switched on again.
If an unavailable sensor is touched
whilst the system lock or the safety lock
is activated,  will appear in the front left
cooking zone display and  will appear
in the front right cooking zone display
after a few seconds.
Activating
 Touch the + and - sensors at the
same time until  appears in the front
left and  appears in the front right
cooking zone display and a tone
sounds.
 will go out after a short while.
Deactivating
 Touch the + and - sensors at the
same time until  goes out from the
front left and  goes out from the
front right cooking zone display and a
tone sounds.

Safety features

35