Label Printer; Power Supply And Jumper Cables (Optional) - Sony Ericsson K660i Installation Instruction, Mechanical

Hide thumbs Also See for K660i:

2.8 Label Printer

A Zebra printer (41) should be set up to print labels. Connect the printer with a Null

Modem (42) cable to the serial port on the computer (34). Read the Zebra installation

manual for more information about the installation.

Refer to Equipment list for support Zebra printers.

1. Install the power supply (POS-77) according to the manufacturer's instructions.

2. Connect the jumper cables to the power supply's (POS-77) output terminals. Red

(POS-88) to the positive output terminal and black (POS-89) to the negative

output terminal.

3. Connect the banana plugs of the red and black jumper cables to the battery

eliminator's (POS-52) red and black connectors.

4. Set the output of the Power Supply as follows:

•

1208-1790 Rev 2

Company Internal

Sony Ericsson Mobile Communications AB

Voltage: 3.8Vdc

Current: 2.0 Amps

Installation Instruction, Mechanical

4(6)

Table of Contents