Bluetooth Device; Label Printer; Power Supply And Jumper Cables (Optional) - Sony Ericsson K770 Installation Instruction, Mechanical

Hide thumbs Also See for K770:

2.7 Bluetooth Device

Any Bluetooth device (POS-45) such as a headset or Bluetooth phone can be used to

verify the Bluetooth function in the phone. Set up the connection according to the chosen

equipment's manufacturer's instructions.

A Zebra printer (41) should be set up to print labels. Connect the printer with a Null

Modem (42) cable to the serial port on the computer (34). Read the Zebra installation

manual for more information about the installation.

1. Install the power supply (POS-77) according to the manufacturer's instructions.

2. Connect the jumper cables to the power supply's (POS-77) output terminals. Red

(POS-88) to the positive output terminal and black (POS-89) to the negative output

terminal.

3. Connect the banana plugs of the red and black jumper cables to the battery

eliminator's (POS-52) red and black connectors.

4. Set the output of the Power Supply as follows:

•

1/00021-1/FEA 209 544/142 A

Company Internal

Sony Ericsson Mobile Communications AB

Voltage: 3.8Vdc

Current: 2.0 Amps

Installation Instructions, Mechanical

4(6)

Table of Contents