Table of Contents
Advertisement
22
USING THE PROJECTOR
Watching Projector
Turning on the Projector
1
Connect the power cord correctly.
2
After waiting for a moment, press
the POWER button on the remote
control or the control panel.
(The light on the control panel will be
turned on.)
3
In the Language Selection screen,
select a language.
4
Select an input signal by using the
INPUT button on the remote control.
Focus and Position of the
Screen Image
When an image appears on the screen,
check if it is in focus and fits the screen
properly.
y To adjust the focus of the image,
y
rotate the focus ring.
Focus ring
Watching Projector
1
In Standby mode, press the POWER
button to turn the projector on.
2
Press the INPUT button and select
the input signal you want.
3
Control the projector using the fol-
lowing buttons while watching projec-
tor.
Button
CH
Scrolls through saved
︿, ﹀
channels.
LIST
Selects a channel on the
saved or recent watched
channel list.
0 - 9
Selects a channel by
entering numbers.
VOL -, +
Adjusts the volume level.
MUTE
Mutes all sounds.
Q.MENU
Accesses the quick menu.
(see page 27)
FLASHBK
Alternates between
the last two channels
selected.
4
To turn the projector off, press the
POWER button.
Description
Advertisement
Table of Contents
