Menu Mode; Language Setting For Single Brew - Keurig K-Cup K3000SE Owner's Manual

SECTION 2
Menu Controls & Indicators

Menu Mode

12
fig.
To enter the MENU MODE switch the
power off. Open the K-Cup ® Pack Bin
door and locate the RED button at the
top of the bin area (fig. 12). Switch the
brewer on and within 4 seconds push the
RED Button 4 times.
Scroll through the menu screens
answering the prompts that appear.
4 seconds
To scroll through the screens after
making selections press the "NEXT"
push 4 times
button. Once the menu is accessed
you will see the display screens in the
following order:
SET LANGUAGE
The first screen displayed will be where you change the default language
to either Spanish or French (fig. 13), if English is not going to be the primary
language displayed.
NOTE: If this screen does not appear, repeat the above procedure until it does.
Simply press the flashing button under the language you wish to set as your
default. Once done, press the button under "NEXT."
NUMBER OF BREWS
Displays the number of brews the brewer has performed. This cannot
be reset.
SET VEND/NO VEND
13
fig.
To enable or disable the use of a coin unit press
the "ADJUST" button. The options are "NO VEND"
and "VEND AT SET PRICE." Once complete press
SET LANGUAGE
English
the "NEXT" button.
English Español
Français Next
NOTE: Vending requires the addition of a Coin
Changer. Please contact your Keurig Authorized
Distributor for purchase information.
SET VEND PRICE
If a coin unit is being used, press the "ADJUST" button to set the vend price.
Adjust the price by pressing the + or – button to get desired price.
Adjustments are in $0.05 increments.
ADJUST BREW TEMP
The brew temperature can be adjusted in one degree increments between
187 – 192 °F by pressing the "ADJUST" button.
INVERT DISPLAY COLORS
Change the display to a LIGHT background with DARK letters by pressing
the "ADJUST" button.
SET SERVICE PHONE NUMBER
Enter your phone number here using the "ADJUST" and "NEXT" buttons. You
must scroll through all ten digits.
SET MUG LIGHT OPTION
You can disable the mug placement sensors by pressing the "ADJUST"
button, however this is not recommended.
10
HOT WATER DISPENSE
Disable the plain Hot Water button by pressing the "ADJUST" button.
SELECT BREW SIZE
Select which cup sizes you want the brewer to dispense. Four brew sizes are
available; 4 oz., 6 oz., 8 oz., and 10 oz. You can disable up to 3 cup sizes. One
cup size has to be on at all times.
ERROR CODE
The last error condition that the brewer detected will be displayed in this
menu. Refer to the "ERROR CODE" chart on page 16 for code definitions.
WAS THE BREWER DRAINED
Press "NO" or "YES" accordingly. This is the last menu for the
"MENU MODE."
NOTE: You must scroll through the "MENU MODE" completely. Failure to do so
will not save any changes that have been made.
If you are experiencing any problems with your brewer, please contact
your Keurig Authorized Distributor.
Language Setting For a Single Brew
14
fig.
The K3000SE brewer allows users to temporarily
READY - CHOSE K-CUP PACK change the language for a single brew. Simply press
LIFT HANDLE
the corresponding button while the LCD Display
Español Français Hot
Water
is in its idle state (fig.14) and all further brewing
instructions will be in the desired language. The
brewer will return to the default language when the
brew cycle has been completed.
11