Replacing The Suction Turbine; Filter Dedusting; Replace The Handle - Kärcher NT 14/1 Service Manual

5.8 Replacing the suction turbine


Unscrew the fastening screws for the turbine cas-
ing.
7
6
1 Top part of the turbine casing
2 Sound proofing
3 Connection plug of the turbine
4 Suction turbine
5 Bottom part of the turbine casing
6 Air channel
7 Seal

Disassemble turbine casing.

Pull the connection plug off the turbine.

Remove the suction turbine.

Place the suction turbine onto the seal of bottom
part of the turbine casing (see arrow).
2
1
1 Connection plug of the turbine
2 Suction turbine

Align the new suction turbine as per the marking
arrows.

Connect the connection plug of the turbine.

Install the turbine casing in the reverse sequence.
12
English 5.906-492.0 Rev. 00 (12/10)
1
2
3
5
1

5.9 Filter dedusting

4
3
3
4
1 Sliding part
2 Base plate
3 Button for filter shake off system
4 Pressure spring

5.10 Replace the handle

3 4
1 Fastening screw
2 Disc
3 Brake bracket
4 Pressure spring
5 Handle

Unscrew locking screws.

Remove the disc.

Remove the handle.

Replace the brake bracket if necessary.

Replace the pressure spring if necessary.

Install the new handle in reverse sequence.
2
5
1
2 4 3
1