Remote Access Code; Message Alert Tone - VTech 15450 User Manual

REMOTE ACCEss CODE

A two-digit security code is required to access the
answering machine remotely from any touch-tone
telephone. The preset code is 00. You can set the code
from 00 to 99.
1. Press
. Press
.
3. Press
.
4. Press
.
5. Enter a two-digit number, then press

MEssAGE ALERT TONE

When the message alert tone is set to On, and there is at
least one new message, the telephone base beeps every
10 seconds. The message alert tone is preset to Off.
There is no audible alert at the handset.
1. Press
. Press
.
3. Press
.
4. Press
.
5. Press
when idle.
or to scroll to Answering sys, then press s
or to scroll to Ans sys setup, then press
or to scroll to Remote code, then press
when idle.
or to scroll to Answering sys, then press s
or to scroll to Ans sys setup, then press
or to scroll to Msg alert tone, then press
or to scroll to On or Off, then press
59
.
.