Performing A Control Test - Accu-Chek Aviva Nano User Manual

4
Control Tests

Performing a Control Test

You need the meter with pre-inserted activation chip, a test strip, and control solution Level 1, Level 2, or
both. The control level is printed on the bottle label.
1
Check the use by date
on the test strip
container. Do not use
test strips past the
use by date.
Touch the drop to the
front edge of the yellow
window of the test strip
until you see flash.
Do not put control
solution on top of the
test strip.
28
2
Insert the test strip into
the meter in the direction
of the arrows.
Place the meter on a flat
surface.
5
When you see flash,
there is enough control
solution in the test strip.
3
or
Select the control
solution to test. You will
enter the level later in
the test.
6
Wipe the tip of the bottle
with a tissue. Cap the
bottle tightly.
4
Remove the cap from the
control solution bottle.
Wipe the tip of the bottle
with a tissue.
Squeeze the bottle until a
tiny drop forms at the tip.