Before You Call For Service - GE DCXH46 Owner's Manual & Installation Instructions

Before you call for service...

Problem
Static occurs
Inconsistent drying times
Clothes take too long
to dry
Clothes are wrinkled
Clothes shrink
22
Possible Causes
Overdrying
No fabric softener was used
Synthetics, permanent press and
blends can cause static
Type of heat
Improper sorting
Large loads of heavy fabrics (like • Large, heavy fabrics contain more moisture and take
beach towels)
Controls improperly set
Lint filter is full
Improper or obstructed ducting
Blown fuses or tripped circuit
breaker
Overloading/combining loads
Underloading
Overdrying
Letting items sit in dryer after
cycle ends
Overloading
Some fabrics will naturally shrink • To avoid shrinkage, follow garment care labels exactly.
when washed. Others can be
safely washed, but will shrink
in the dryer
What To Do
• Try a fabric softener.
• Adjust controls for less drying.
• Try a fabric softener.
• Try a fabric softener.
• Automatic drying times will vary according to the type
of heat used (electric, natural or LP gas), size of load,
types of fabrics, wetness of clothes and condition of
exhaust ducts.
• Separate heavy items from lightweight items (generally,
a well-sorted washer load is a well-sorted dryer load).
longer to dry. Separate large, heavy fabrics into smaller
loads to speed drying time.
• Match control settings to the load you are drying.
• Clean lint filter before every load.
• Check Installation Instructions for proper
ducting/venting.
• Make sure ducting is clean, free of kinks and
unobstructed.
• Check to see if outside wall damper operates easily.
• Check the Installation Instructions to make sure the dryer
venting is correct.
• Replace fuses or reset circuit breakers. Since most
dryers use two fuses/breakers, make sure both are
operating.
• Do not put more than one washer load in the dryer at
a time.
• If you are drying only one or two items, add a few items
to ensure proper tumbling.
• Select a shorter drying time.
• Remove items while they still hold a slight amount of
moisture. Select a LESS DRY setting.
• Remove items when cycle ends and fold or hang
immediately.
• Separate large loads into smaller ones.
• Some items may be pressed back into shape after drying.
• If you are concerned about shrinkage in a particular item,
do not machine wash or tumble dry it.