Panasonic TH-43LFE8U Operating Instructions Manual page 49

[Signal range]
Switches the dynamic range according to the input
signals below.
HDMI1, HDMI2, DVI-D
[Video(16-235)]:
If the input signal is the video range, Example: HDMI
terminal output for DVD player
[Full(0-255)]:
If the input signal is full range, Example: HDMI
terminal output for personal computer
[Auto]:
Switches the dynamic range automatically between
[Video(16-235)] and [Full(0-255)] according to the
input signal.
Note
●
[Auto] can be selected when the HDMI signal input.
[Input level]
This menu is displayed at PC IN and VIDEO input.
Adjustment of parts which are extremely bright and
hard to see.
-16 to + 16:
(Level low) - (Level high)
[3D Y/C filter]
Set this if the video looks unnatural during the
composite video signal input. Set this to [On]
normally.
Note
● Depending on the signaling system, this setting may
be less effective or may not be effective at all.
[Colour system]
Sets the colour system according to the signal
method during the composite video signal input. Set
this to [Auto] normally. This automatically detects the
input signal format.
[Auto], [PAL], [SECAM], [NTSC], [NTSC 4.43], [PAL
M], [PAL N]:
Set this to [Auto] when viewing PAL-60 videos.
When images are unstable
When the system is set to [Auto], images become
unstable in rare case under the condition that the
input signals are at low level or have many noises. In
this case, set the system so it conforms with the input
signal format.
For 65-inch model
[FRAME CREATION]
Improves motion picture quality. Select [Off] when the
motion picture looks unnatural.
[Off]:
The frame creation is disabled.
[Min], [Mid], [Max]:
Set the degree of the frame creation.
Note
●
[FRAME CREATION] is a function for 65-inch models.
This function is not available for 43 / 48 / 55-inch
models.
Input signal display
Displays the frequency and the type of the current
input signal.
H-freq. 33.72
V-freq. 60.00
74.18
Dot clock freq.
Signal format 1125(1080)/60i
Display range:
Horizontal (15 kHz - 135 kHz)
Vertical (24 Hz - 120 Hz)
The dot clock frequency is displayed during Digital and
PC signal inputs.
kHz
Hz
MHz
English
49