Panasonic TH-43LFE8U Operating Instructions Manual page 39

[H-position] Adjust the horizontal position with
[H-size] Adjust the horizontal size with
[V-position] Adjust the vertical position with
[V-size] Adjust the vertical size with
[Clock (During PC input signal)
phase]
In some cases, frame of the screen
appears blurred or smudged, when RGB
signal or PC signal are input.
[Dot clock] (During PC input signal)
Periodic striped pattern interference
(noise) may occur when a striped pattern
is displayed. If this happens, adjust so
that any such noise is minimized.
[Over scan]
Turn image over scan On/Off.
Applicable input signal:
525i, 525p, 625i, 625p, 750/60p,
750/50p (Component Video, RGB,
DVI-D, HDMI)
[On]
Note
● When [Off] is set, [H-size] and
[V-size] cannot be adjusted.
. [1:1 pixel
mode]
.
.
.
Note
● In some cases, noise appears outside the area
picture is displayed, but it is not a malfunction.
[Off]
Adjusts the display size when 1125i or
1125p signal is input.
[Off]
Applicable input signal:
1125 / 50i, 60i, 24PsF, 24p, 25p, 30p,
50p, 60p
Note
●
Select [Off] when flickering is shown
around the image.
●
[H-size] and [V-size] cannot be
adjusted when [On] is selected.
[On]
39
English