Finishing; Bricks And Baffles Installation - Napoleon EPI 1101 Installation And Operating Instructions Manual

5.0 FINISHING

5.1

BRICKS AND BAFFLES INSTALLATION

OPERATION OF THE APPLIANCE WITHOUT THE BAFFLES CAN RESULT IN EXCESSIVE
TEMPERATURES THAT COULD DAMAGE THE APPLIANCE, CHIMNEY AND THE SURROUNDING
A. Install (1101) four (A) bricks and one (C) brick or (1402) six (A) bricks along both sides of the
appliance. Before installing the back bricks, loosen the screw holding the retainer and ensure that it
has been moved forward. Install the four (A) bricks and two (D) bricks along the back wall by pivoting
the bricks up under the brick retainer. Retighten the screw. NOTE: Center (D) bricks have been
notched.
B. Carefully pivot fi bre baffl e (G) and (H) up onto the top of the side brick. Slide it over onto the fl ange
of the manifold. Ensure that the top baffl es are pushed all the way to the rear of the fi rebox, leaving a
minimum of a 1" (25mm) gap along the front. This will allow the fl ue gases to escape the fi rebox.
C. Install the bottom (1101) four (A) bricks and two (B) bricks or (1402) six (A) bricks and two (B) bricks,
working from the back of the appliance forward.
D. Install the two (B) bricks, one (E) brick and one (F) brick along the front as illustrated.
NOTE: Do not operate if baffl e and manifold shield are not in position.
FIREBRICK
DIMENSIONS
4 1/2" x 9"
A
(114mm x 229mm)
3" x 9" (Molded)
B
(6mm x 229mm)
4 1/2" x 4 1/2"
C
(114mm x 144mm)
3" x 9"
D
(76mm x 229mm)
4 1/2" x 9"
E (Notched)
(114mm x 229mm)
1101
A
C
A
A
A
A
A A
D
A
A
I
G
A
B
H
B
All Firebricks are 1 1/4" (32mm) Thick
PART #
1101
W090-0001 W090-0001
X15
W090-0002 W090-0002
X2
W090-0003
X2
W090-0166 W090-0166
X2
W090-0207 W090-0207
X1
BRICK
RETAINERS
E
(Fibre Baffles)
W018-0077 X2
F
A
A
A
D
C
J
A
A
A
NOTE: BRICKS
E & F ARE
NOTCHED AT
REAR.
E
WARNING
!
ENCLOSURE.
FIREBRICK
DIMENSIONS
1402
4 1/2" x 9"
F
(Notched)
X21
(114mm x 229mm)
2 1/4" x 9"
G
X2 (57mm x 229mm)
2 1/4" x 6 1/8"
H
N/A
(64mm x 121mm)
2 1/2" x 4 1/2"
I
X2 (64mm x 114mm)
1 1/2" x 4 1/2"
J
X1 (38mm x 114mm)
A
A
A
G
B
F
PART #
1101 1402
W090-0208 W090-0208
X1 X1
W090-0018 W090-0018
X1 X1
W090-0019 W090-0019
X1 X1
W090-0016 W090-0016
X1 X1
W090-0017 W090-0017
X1 X1
BRICK
1402
RETAINERS
E
A
F
A
A
A A
A
A
D
A
D
A
A
I
A
A
J
A
A
A
H
B
W415-1469 / A / 06.14.16
13
EN
(Fibre Baffles)
W018-0078 X2
A
A
A