Before You Begin - Razor RSF650 Owner's Manual

BEFORE YOU BEGIN

Remove contents from box. Remove the separators that protect the components from damage during shipping. Inspect
the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping.
Because the electric motor bike was 95 percent assembled and packed at the factory, there should not be any problems,
even if the box has a few scars or dents.
MAKE SURE POWER SWITCH IS TURNED "OFF" BEFORE CONDUCTING ANY ASSEMBLY OR
MAINTENANCE PROCEDURES.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
Allow up to 15 minutes for assembly, not including initial charge time.
Allow up to 12 hours for charge (see page 5 for charging information).
Charger
(Note: Charger design may vary
from one shown)
3.
Chain
Required Tools
5 mm Allen wrench
6 mm Allen wrench
Front Fork
Storage Compartment
2.
Brake Levers
Throttle
1.
3
WARNING: DO NOT USE
NON-RAZOR PRODUCTS WITH YOUR
RAZOR ELECTRIC MOTOR BIKE. The
electric motor bike has been built to
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on the
basis of its compatibility with the
frame, fork and all other parts. Certain
aftermarket products may not be
compatible and will void the warranty.
Product ID Locations:
See locations to the left
1. Battery cover
2. Frame (underneath unit)
3. Charger
4. Box - side of UPC (not shown)
Plastic Bag Contents:
• Charger
• Handlebar Clamps
• Tool: Allen Wrench
• Owner's Manual