Program Launcher-Connect-Profile Setup - Panasonic KX-TDA50 Pc Programming Manual

2.2.7 Program launcher—Connect—Profile Setup
would prefer to choose from among pre-saved profiles instead, see 2.2.7 Program launcher—Connect—
Profile Setup for more details about creating profiles.
To connect to the PBX by Modem
1.
From the program launcher, select Connect.
The Login window will be displayed.
2.
Select a connection option.
•
Select a Profile Name if you want to use a pre-saved profile.
a.
Select the profile to use from the drop-down list.
b.
If the system password for the PBX has not been stored with the profile, enter it.
If the system password has been stored with the selected profile, it does not need to be entered.
•
To enter the parameters manually, select the PBX Model and confirm that the Modem radio button is
selected.
a.
Specify the settings as required. For more details, see the table below.
b.
Enter the system password for the PBX.
3.
Click Connect.
Connection Settings for Modem
Setting
Dial Number
Dial Type
Comment
Port
Baud Rate (bps)
Modem Initialize
2.2.7 Program launcher—Connect—Profile Setup
Profiles are useful when one PC is used to connect to multiple PBXs. Rather than manually adjusting the
connection settings each time a different PBX is accessed, it is possible to store the connection settings for
several PBXs. Then, when you wish to connect to a specific PBX, you can simply choose that PBX's profile
from the list.
30 PC Programming Manual
Values
1-9, 0, *, #, -, "," [comma], T, P,
W
Auto(Tone), Auto(Pulse),
Manual
Max. 40 characters
COMx
1200, 2400, 4800, 9600,
19200, 38400
–
Description
Enter the telephone number to be dialed
to access the PBX.
T: Converts the Dial Type from Pulse to
Tone.
"," [comma], P, W: Inserts a pause.
Specify the outgoing dialing method.
If Manual is chosen, dialing must be
done with a connected telephone.
Enter a comment to identify the set of
values.
Specify the number of the COM port
assigned to the PC's modem interface.
Only available COM ports will be
displayed.
Specify the speed of data transmission.
Enter the modem initialize command,
and click Initialize to send the
command to the modem.
For more details, refer to your modem's
instruction manual.
Document Version 2010-11