Samsung sch-i220 series User Manual page 120

• Highlight your
Bluetooth headset,
then press the Next
soft key. You are
notified that your i220
has connected with
your Bluetooth
headset.
3. To remove a device
from the list:
• Press the Menu soft key, then select Delete. You are prompted to
confirm your deletion.
• To confirm the deletion, press the Yes soft key.
My Information Setting
This option lets you change your i220's Bluetooth device name.
At the Settings menu, select Connections
1.
➔
My Information Setting. The My Information Setting
screen appears in the display showing the i220's current
Bluetooth Device name.
To change the name, highlight the Device name: field.
2.
Use the keypad to edit the name or enter a new name.
3.
To save your new setting, press the Done soft key.
4.
117
Incoming Beam Setting
1.
2.
3.
FTP Server Setting
1.
➔
2.
Bluetooth
3.
Basic Printer Setting
Lets you assign a Bluetooth printer that is paired with your i220
as the Default printer. (For more information, refer to "General
Settings" on page 116.)
At the Settings menu, select Connections
➔
Incoming Beam Setting. The Incoming Beam Setting
screen appears in the display with the Receive incoming
beams checkbox highlighted.
Enable/disable this setting by pressing
To save your new setting, press the Save soft key.
At the Settings menu, select Connections
➔
FTP Server Setting. The FTP Server Setting screen
appears in the display showing the current Bluetooth and
OBEX FTP security settings and Shared Folder setting.
Enter or select values for each setting in turn.
• Highlight each setting by pressing the Navigation key Up or Down.
• Select values by pressing
To save your new settings, press the Save soft key.
➔
Bluetooth
.
➔
Bluetooth
.