Table of Contents
Advertisement
29
Your first week with your new phone
Your first week with your
new phone
About waterproof protection
What does it mean by waterproof in HTC Butterfly 2?
HTC Butterfly 2 has an IP Code of IPX7. The phone meets this standard under the condition that
the nano SIM and microSD covers are closed tightly.
That means:
§ The phone can continue to operate after it has been gently immersed in plain tap water at
room temperature, within 1 meter deep for no more than 30 minutes.
§ You can make and receive calls, even with wet hands and without an umbrella, under
moderate rain.
§ If the phone accidentally gets in contact with sea water, soapy water, or other liquids, you can
rinse it with a low flow of plain tap water.
HTC Butterfly 2 must not be exposed to non-fresh water, high water pressure, or sand since these
may cause overheating, electric shock, or damage to the phone. For usage precautions and tips on
care and maintenance, see
on page 30. Also make sure to read the Safety guide that comes with your phone.
Important: Do's and don'ts
Before use
Make sure the nano SIM and microSD trays are inserted into the slots securely and their covers are
closed tightly. For instructions, see
card
on page 15.
§ Never attempt to insert or remove the nano SIM and microSD trays with gloves, wet hands,
or when the phone is wet.
§ Before closing the covers, wipe off every drop of water or dirt with a clean, dry cloth.
§ When closing the covers, make sure that no hairs, fibers, or small particles are caught
between the covers and the slot openings to prevent water from seeping through the gaps and
entering the phone.
While using
Don't immerse HTC Butterfly 2 in or let the USB port and headset jack come in contact with the
following:
Important: Do's and don'ts
Inserting a nano SIM card
on page 29 and
Care and maintenance tips
on page 12 and
Inserting the microSD
Advertisement
Table of Contents
