Information About The Physical Extension Cards; Csif4 Card (Kx-Tda0143) And Csif8 Card (Kx-Tda0144) - Panasonic KX-TDE100 Installation Manual

3.6.1 CSIF4 Card (KX-TDA0143) and CSIF8 Card (KX-TDA0144)

3.6 Information about the Physical Extension Cards

3.6.1 CSIF4 Card (KX-TDA0143) and CSIF8 Card (KX-TDA0144)
Function
CSIF4: 4-port CS interface card for 4 CSs.
CSIF8: 8-port CS interface card for 8 CSs.
LED
RJ45
(LINE 1 to LINE 8)
To CS
Accessories and User-supplied Items
Accessories (included): none
User-supplied (not included): RJ45 connector
CAUTION
Make sure that the status of all the CSs connected to the CSIF cards are set to in-service (INS). For
information about how to view CS information using the Maintenance Console, refer to "2.6.15 Utility—
CS Information" in the PC Programming Manual. If there is a CS in out-of-service (OUS) status, make sure
that it is securely connected to the CSIF card. If the CS remains in OUS status, there may be a fault with
the connection. Do not leave the connected CS in OUS status since it may cause severe damage to the
CSIF card.
Note
•
LINE 5 to LINE 8 are for CSIF8 card only.
•
When using the CSIF4 card, please note that the PBX software will recognize the CSIF4 card as the
CSIF8 card. As a result, 8 cell stations may appear to be available; however, only 4 cell stations are
supported by the CSIF4 card.
•
For details about connecting CSs, refer to the Quick Installation Guide for the relevant CS.
Editing the CS Name using the Maintenance Console
While programming the PBX, we strongly recommend that you input a unique recognizable CS name
(maximum 20 characters) for each CS port in use, and "(Reserved)" or "(Not for CSIF4)" for unused ports or
unavailable ports respectively for the following reasons:
a.
you will be able to easily distinguish installed CSs.
b.
you will be able to know which CSIF card has been installed; CSIF4 or CSIF8.
96 Installation Manual Document Version 2010-08