Removing The Computer Cover - Lenovo S400Z User Manual

5. Insert the three metal studs on the base into the corresponding holes in the new monitor stand. Then,
rotate the bottom cover of the base to expose the screw
the monitor stand.
Figure 15. Installing the monitor stand on the base
6. Insert the two hooks
as shown. Then, pivot the monitor stand downward so that the two screw holes in the monitor stand
are aligned with the corresponding holes in the computer cover.
Figure 16. Installing the monitor stand on the computer cover
7. Install the two screws to secure the monitor stand on the computer cover.

Removing the computer cover

Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page iii.
CAUTION:
54
Lenovo S400z and S405z User Guide
1 on the new monitor stand into the corresponding holes in the computer cover
1 as shown. Tighten the screw to secure