Table of Contents
Advertisement
Section 4 - Configuration
User Name:
Enter your DSL account username provided by your ISP.
Password:
Enter your DSL account password provided by your ISP.
Type:
Select how your DSL-2745 connects to your ISP. Choose either
Continuous, Connect on Demand, and Manual.
If you selected Connect on Demand, enter the amount time the
Idle Time (min):
router waits if there is no activity before disconnecting.
If IPv4 or IPv4/IPv6 is selected, these settings are disabled. The
WAN IP Settings:
router will use DHCP only, Fixed (Static IP) is unavailable.
Configure the IPv6 WAN settings. If the IP Protocol is set to IPv4,
IPv6 WAN
Settings:
these settings are unavailable.
Select either Slaac or Static.
Address Mode:
IPv6 Address:
Enter your IPv6 Static Address. Only available in Static mode.
IPv6 Gateway:
Enter your IPv6 Gateway. Only available in Static mode.
DHCPv6 Mode:
Select either Auto, Enable, or Disable.
Request DHCPv6
Check this box to enable. Only available if DHCPv6 Mode is set to
Address:
Enable or Auto:
Request DHCPv6
Check this box to enable. Only available if DHCPv6 Mode is set to
PD:
Enable.
Click Add to create your connection.
D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual
PPPoE Mode (continued)
30
Hide quick links:
Advertisement
Table of Contents
