Advertisement
Troubleshooting Guide
PROBLEM
There is no
steam.
The nozzle leaves
water drops on the
garment.
14
FREEPHONE: 0800 862 0453
POSSIBLE REASONS
The steamer is not turned on.
There is not enough
water in the unit.
You are not using the steam
bonnet.
The steam bonnet is
too wet.
The frame has condensation.
SOLUTIONS
Verify that the blue light on the unit is lit. If not,
check that the unit is plugged in and the on/off
button is raised and in the on "I" position.
Verify that the water tank is at least half way full
or fill to the max fill line.
The small steam bonnet must be in place
at all times during usage.
The bonnet prevents water drops being left on
the garment and to removes impurities from your
water.
Let the unit cool for 30 minutes, remove the
steam bonnet and let it dry out before using
again or replace with a new bonnet.
Let the appliance cool and wipe the frame off.
Advertisement
