Advertisement
Care of Your Press & Refresh
Cleaning & Storing
1
Turn the garment steamer off
"O".
2
Unplug the appliance from the
electrical outlet.
3
Let the appliance cool
completely for approximately
30 minutes.
4
Empty the water from the
water tank.
5
Wipe the exterior of the
garment steamer with a damp
cloth and wipe dry if needed.
6
Bundle up the power cord and
secure it with the VELCRO
strap that is attached to the
power cord. Always store your
appliance in a cool, dry area.
Care & Use of the Small Steam
Bonnet
7
The steam bonnet helps filter
impurities from your water.
It might become slightly
discolored over time.
8
Let the steamer cool completely
before removing the bonnet.
Gently pull on either side of
the bonnet to remove from the
steam nozzle.
9
Hand wash the bonnet in cold
water with a mild detergent and
let air dry completely before
using again. Do not dry in
clothes dryer.
®
10
To re-attach the bonnet, pull
one corner of the bonnet over
the steam nozzle then the other
corner. Secure the bottom of
the bonnet to the nozzle using
the bottom tab.
™
Descaling Procedure
Your garment steamer must be
descaled at an interval that will
depend on the water quality and
the frequency of use. The garment
steamer should be descaled at least
once a year or every 100 hours of
use. If your water is considered
hard, increase the frequency of
descaling.
11
Unplug the steamer and fill the
unit with 1/3 white vinegar and
2/3 water.
12
Turn the steamer on and run
for 3 minutes; do not steam
any fabric or clothing with the
descaling solution.
13
Turn the steamer off. Unplug
the steamer and allow to cool
down for at least 30 minutes.
14
Empty the water and vinegar
solution from the steamer.
15
Rinse the steamer by filling with
fresh water and wmptying out.
16
Fill the unit with fresh water
and repeat steps 12-14.
NOTE: After descaling if you
believe that there is still buildup
in the steamer, repeat this
procedure. Use a new vinegar
and water solution every time
you repeat steps 11 and 12.
13
Advertisement
