Bosch Uneo Maxx Original Instructions Manual page 12

OBJ_BUCH-1190-004.book Page 12 Wednesday, June 11, 2014 10:03 AM
12 | English
Hammer Safety Warnings
 Wear ear protectors. Exposure to noise can cause hear-
ing loss.
 Hold power tool by insulated gripping surfaces when
performing an operation where the cutting accessory
or fastener may contact hidden wiring. Cutting accesso-
ry and fasteners contacting a "live" wire may make ex-
posed metal parts of the power tool "live" and could give
the operator an electric shock.
 Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead to
fire and electric shock. Damaging a gas line can lead to ex-
plosion. Penetrating a water line causes property damage.
 Switch off the power tool immediately when the tool in-
sert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
 The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for hammer drilling in concrete, brick
and stone. It is also suitable for drilling without impact in wood,
metal, ceramic and plastic. Machines with electronic control
and right/left rotation are also suitable for screwdriving.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
1 609 92A 0R0 | (11.6.14)
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 SDS-Quick tool holder
2 Dust protection cap
3 Locking sleeve
4 Selector switch for drilling/hammer drilling
5 Indicator for right rotation
6 Indicator for left rotation
7 Rotational direction switch
8 On/Off switch
9 Battery charge-control indicator
10 Battery pack*
11 "PowerLight"
12 Universal bit holder*
13 Screwdriver bit*
14 Screwdriver bit with ball catch*
15 Drill bit with hexagon shank*
16 Drill bit with SDS-Quick tool holder*
17 Handle (insulated gripping surface)
18 Battery unlocking button
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Cordless Rotary Hammer
Article number
Rated voltage
Rated speed
Impact rate
Impact energy per stroke according
to EPTA-Procedure 05/2009
Tool holder
Max. drilling dia.
– Concrete (with twist drill)
– Steel
– Wood
– Wood (with spade bits Self Cut)
Weight according to
EPTA-Procedure 01/2003
Permitted ambient temperature
– during charging
*
– during operation and during
storage
Recommended batteries
Recommended chargers
* Limited performance at temperatures <0 °C
Technical data determined with battery from delivery scope.
Uneo Maxx
3 603 J52 3..
V= 18
-1
min 0–900
-1
min 0–5000
J 0.6
SDS-Quick
mm 10
mm 8
mm 10
mm 20
kg 1.4
°C 0...+45
°C –20...+50
PBA 18V ...V-.
AL 22.. CV
Bosch Power Tools