Important Safety Reminders; Getting To Know Your Cleaner; Assembling Your Cleaner - Hoover SE71WR01 Instruction Manual

IMPORTANT SAFETY REMINDERS

This cleaner should only be used for domestic cleaning, as described in this user guide.
Please ensure that this guide is fully understood before operating the appliance. Use only
attachments recommended or supplied by Hoover.
WARNING: Electricity can be extremely dangerous. This appliance is double insulated
and must not be earthed. This plug is fitted with a 13 amp fuse (UK only).
IMPORTANT: The wires in the mains power lead are coloured in accordance with the
following code: Blue – Neutral
STATIC ELECTRICITY: Some carpets can cause a small build up of static electricity.
Any static discharge is not hazardous to health.
AFTER USE: Switch the cleaner off and remove the plug from the electricity supply.
Always switch off and remove the plug before cleaning the appliance or attempting any
maintenance task.
SAFETY WITH CHILDREN, ELDERLY OR THE INFIRM: Do not let children play with
the appliance or its controls. Please supervise the use of the appliance by older children,
the elderly or the infirm.
HOOVER SERVICE: To ensure the continued safe and efficient operation of this appliance
we recommend that any servicing or repairs are only carried out by an authorised Hoover
service engineer.
IT IS IMPORTANT THAT YOU DO NOT:
• Position the cleaner above you when cleaning the stairs.
• Use your cleaner out of doors or on any wet surface or for wet pick up.
• Pick up hard or sharp objects, matches, hot ashes, cigarette ends or other
similar items.
• Spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours
as this may cause risk of fire / explosion.
• Run over the supply cord when using your cleaner or remove the plug by pulling
on the supply cord.
• Stand on or wrap the power cord around arms or legs when using the cleaner.
• Use the appliance to clean people or animals.
• Continue to use your cleaner if it appears to be faulty. If the supply cord is damaged
stop using the cleaner IMMEDIATELY. To avoid a safety hazard, an authorised
Hoover service engineer must replace the supply cord.
In the unlikely event that any item is missing or you experience any problems with the
product DO NOT TAKE IT BACK TO THE SHOP.
Please contact the Hoover customer helpline: 08444 995 599
Email: customer.services@hoovercandy.com
Should any faults occur with your cleaner during the first 12 months contact the Hoover
Customer Helpline on the number above. If you are having difficulty in obtaining filters
or any other accessories for your cleaner contact the Hoover Customer helpline or order
online at www.hooverspares.com
4800XXXX - Sprint - Multi 5lang IM.indd 1
Brown – Live

GETTING TO KNOW YOUR CLEANER

A. Cleaner main body
B. Dust Container
C. Dust Container Handle
D. Dust Container Release Button
E. Dust Container Flap Opening Button
F. Dust Container Flap
G. Pre-Motor Filter
H. On/Off Button
I. Variable Power Control Knob*
J. Cord Rewind Button
K. Plastic Tubes*
L. Hose
M. Hose Release Buttons
N. Hose Handle
O. Suction Regulator
P. Carpet & Floor Nozzle
Q. Floor Type Selector Pedal
R. Nozzle Parking Slot
S. Telescopic Tube*
T. Telescopic Tube Adjuster*
U. Pet Hair Remover Mini Turbo Nozzle*
V. Allergen Remover Mini Turbo Nozzle*
W. 2 in 1 Tool (Crevice Tool/Dusting Brush)

ASSEMBLING YOUR CLEANER

Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position.
To release the hose: simply press the two hose release buttons on the hose end
and pull it out. [2]
2. Connect the hose handle to the tube upper end [3].
3. Connect the tube lower end to the carpet and floor nozzle. [4]
1
GB
(*Certain Models Only)
24/09/2010 01:15:12