Quick Sync Indicator Codes - Dell PowerEdge R730 Owner's Manual

iDRAC Direct LED
indicator pattern
Solid green for two
seconds
Flashing green (on
for two seconds and
off for two seconds)
Turns off

Quick Sync indicator codes

Figure 6. Quick Sync indicator codes
1. Quick Sync status indicator
Power indicator pattern
Slow blink
Solid
Blinks three times rapidly and then turns off
Blinks continuously when the mobile device
touches the antenna
Blinks rapidly five times and turns off for one
second when the activation button is pressed.
This pattern is repeated until the activation
button is pressed again.
Off
Condition
Indicates that the laptop is connected.
Indicates that the laptop connected is recognized.
Indicates that the laptop is unplugged.
2. Quick Sync activation button
Condition
Indicates that Quick Sync is waiting to be configured
from iDRAC.
Indicates that Quick Sync is ready to transfer.
Indicates that the Quick Sync feature is disabled from
iDRAC.
Indicates data transfer activity.
Indicates that the Quick Sync hardware is not
responding properly. Reseat the bezel. If the problem
persists, see Getting help.
Indicates that the Quick Sync feature is turned off.
Use the activation button to activate it. If pressing the
activation button does not turn on the LEDs, it
17