Removing A Hard Drive From A Hard Drive Carrier; Installing A Hard Drive Into A Hard Drive Carrier - Dell PowerEdge R730 Owner's Manual

Steps
1. If a hard drive blank is installed in the hard drive slot, remove it.
2. Install a hard drive in the hard drive carrier.
3. Press the release button on the front of the hard drive carrier and open the hard drive carrier handle.
4. Insert the hard drive carrier into the hard drive slot until the carrier connects with the backplane.
5. Close the hard drive carrier handle to lock the hard drive in place.

Removing a hard drive from a hard drive carrier

Prerequisites
1. Keep the #1 Phillips screwdriver handy.
2. Remove the hard drive carrier from the system.
Steps
1. Remove the screws from the slide rails on the hard drive carrier.
2. Lift the hard drive out of the hard drive carrier.
Figure 56. Removing and installing a hard drive into a hard drive carrier
1. screw (4)
3. hard drive carrier
Related video
http://www.Dell.com/QRL/Server/PER730/HDD

Installing a hard drive into a hard drive carrier

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
2. hard drive
125