Teaching The Remote Control; Additional Information - Sony KV-32HQ100B Operating Instruction

Additional information

Teaching the remote control*

To reduce the number of remote controls you need, this remote control has a
learning feature. Once set up as explained below, it can be used in place of your
other remote controls.
1.
Press and hold the
'AUX' light flashes.
2. Press the button on which you wish to store a learned function. The VCR,
TV, DVD and AUX lights flash in order.
The following buttons can be used to store learned functions:
VIDEO I/1 button
V, v, B, b buttons
Coloured buttons
Prog+/- buttons
3. Position the other remote control as shown. Press the button that you
wish to teach your TV remote control. The VCR, TV, DVD and AUX lights
illuminate at the same time when a function has been learned and stored.
4. Repeat steps 2 and 3 to learn other functions.
.
5.
Press the
Erasing the last learned function
1. Press and hold the
'AUX' light flashes.
2. Press the % button to erase the last learned function.
.
3.
Press the
Erasing all the learned functions
1.
Press and hold the
'AUX' light flashes.
2. Press the % and
.
3.
Press the
26
.
button for approximately six seconds, until the
button to finish.
.
button for approximately six seconds, until the
button to return to normal operation.
.
button for approximately six seconds, until the
.
buttons to erase all learned functions.
button to return to normal operation.
Numbered buttons
OK button
Menu button
*The functions learned may be lost if weak
batteries are not replaced immediately.
Other remote control
2-4cm
TV remote control