Screen Adjustment; Select Epg - Sony KV-32HQ100B Operating Instruction

TV menu system

Screen Adjustment

With this option you can configure settings for the TV screen. Your options are as
follows:
Auto Format:
4:3 Format Correction: When viewing 4:3 or 14:9 broadcasts there will be dark
Picture Rotation:
RGB Setup:

Select EPG

This option allows you to select the provider you wish to use to supply information
for the EPG menu. With the 'Select EPG' option highlighted, press b to display
the Select EPG menu. A list shows all the providers available. Press the v or V
button to select the provider you wish to use. As you highlight each provider, all
the services they offer is displayed on screen so you can select the one you find
the most suitable. Press the OK button to store your choice (refer to page 12 for
EPG operation).
22
With this option switched on, the TV can automatically
adjust the picture size to suit the broadcast. Press V or
v to select 'On' or 'Off'. Press OK to confirm.
areas visible at the edge of the screen. The settings
available are:
4:3 Dark areas remain on the TV screen.
Smart:The TV automatically switches to Smart mode,
eliminating any dark areas on the TV screen.
Press the V or v button to select '4:3' or 'Smart'. Press
OK to confirm.
Note:
This feature is only available when 'Auto Format' is set to 'On'.
Due to the Earth's natural magnetism the picture might
slant slightly. This option allows you to cancel out this
effect. With the 'Picture Rotation' option highlighted,
press b to select. Press v or V to rotate the picture over
a range of -5 to +5. Press OK to store.
When viewing signals from RGB equipment connected
to the AV1 or AV2 sockets (e.g. DVD player,
PlayStation) the picture may need adjusting. This
option allows you to adjust the size and horizontal
picture position of the signals from the RGB equipment.
With the 'RGB Setup' option highlighted, press b to
enter the 'RGB Setup' menu. Press b to select H
Centre. Press v or V to centralise the picture over a
range of -5 to +5. Press OK to store. Press v to select
H Size. Press v or V to adjust the picture size over a
range of -5 to +5. Press OK to store.
Note:
If there is no RGB equipment connected to either the AV1 or
AV2 scart sockets the 'RGB Set-up' option will not be available.