Table of Contents
Advertisement
QQ
3 7 63 1515 0
I SERVICE MODE
The firmware versions of the main microprocessor, DSP and USB microprocessors are displayed.
• Starting Service Mode
a. Connect the power cable to the AC power outlet.
b. To open the tray, press the "F"(EJECT) key of the main unit or "OPEN/CLOSE" key of the remote control.
c. With the tray drawn out, press and hold the "A" (STOP) key of the main unit for about 4 seconds.
Then the SERVICE mode is activated.
Each firmware version is displayed at about 5 seconds intervals.
Destination indication
d. To close the tray, press the "F"(EJECT) key of the main unit or "OPEN/CLOSE" key of the remote control.
e. Press the "STANDBY/ON" key of the main unit or "STANDBY/ON" key of the remote control and disconnect the
power cable from the AC power outlet.
TE
L 13942296513
I FACTORY MODE
Factory settings are restored and the tuner step is changed (L model).
• Starting Factory Reset
All settings are returned to initial settings.
a. Connect the power cable to the AC power outlet.
b. Press the "STANDBY/ON" key for about 4 seconds continuously while pressing "SOUND" and "MODE" keys of the
main unit simultaneously. [FACTORY RESET] is displayed and after about 4 seconds, the power is turned off
automatically.
c. Disconnect the power cable from the AC power outlet.
• Starting Tuner Step (L model)
Select the tuner step AM9kHz/FM50kHz or AM10kHz/FM100kHz.
The initial setting becomes AM9kHz/FM50kHz.
a. Connect the power cable to the AC power outlet.
b. Press the "STANDBY/ON" key for about 4 seconds continuously while pressing "SOUND" and "INPUT" keys of the
main unit simultaneously,
[10kHz/100kHz] flashes and after about 4 seconds, the power is turned off automatically.
*
The setting is changed to [9kHz/50kHz] when the tuner step is activated again.
www
.
http://www.xiaoyu163.com
This is displayed when the SERVICE mode is activated.
The firmware version of the main microprocessor is displayed.
About 5 seconds
The firmware version of DSP is displayed.
About 5 seconds
The firmware version of the USB microprocessor is displayed.
About 5 seconds
Normal display
(Default)
This setting change takes place every time the tuner step is activated.
x
ao
u163
y
i
http://www.xiaoyu163.com
2 9
8
Q Q
3
6 7
1 3
1 5
co
.
CRX-E320/NX-E700
9 4
2 8
0 5
8
2 9
9 4
2 8
m
9 9
9 9
13
Hide quick links:
Advertisement
Table of Contents
