Hoover 2240 classic User Manual page 12

Assembly
Auto Cleaning Function
Clock Timing
Full
go key
Clock key Timing key
Infared Remote Control
Auto clean key
Power key
Spot clean key
AUTO
SPOT
TURBO
CLEAN CLEAN CLEAN
FORWARD
LEFT
BACK
(continued)
a. the cleaner will automatically work after being
b. Press the full go key there will be a broom icon displayed
c. there is a charging dynamic image flashing on the screen
the cleaner can be controlled manually using the infrared
remote control. the three setting keys are the same as the
Indicator
ones that are on the unit. the direction keys can operate the
Turbo clean key
cleaner to work in different directions.
a.
Direction
keys
RIGHT
b.
c.
fully charged.
at lower right corner of the screen, which means the
function is on. Press the key again; the broom icon will
disappear, which means the function is off.
when the cleaner is charging on the auto charging base
plate. Meanwhile, the battery indicator will flash. If it turns
green, it means it has been fully charged and is able to
work. Generally, the charging time is 4-6 hours.
the P key is for powering on/off. Press the P key, the
indicator on the panel will turn off and the cleaner
enters sleep mode, which enables the unit to save
energy when not in use.
Press the P key again, the indicator will turn on, and
the unit will enter the standby stage, waiting for the
next command.
When the virtual wall and remote control are used in
the same area, as they all use the infrared signal, this may
lead to temporary failure of the remote control, you may
operate the remote control after turning off the virtual
wall or when the unit is far away from the Virtual Wall.