Clock Function - Hoover 2240 classic User Manual

Clock Function

1
Clock Timing
Clock key Timing key
Timing Clean Function
2
Clock Timing
Clock key Timing key
c. Press timing key three times and the screen will display oFF. At such time, the
alarm function is off. If you want to turn on the alarm, you may press + key, the
screen will display oN and then press the timing key again.
d. After it displays 'oN' for alarm setting, there will be "2" displayed before the time
in the screen.
CAUTION! The time intervals between the pre-set time set by the
timing key and the standard time set by the clock key is above 4.5
hours. The timing cleaning function will be affected merely when
the battery is fully charged for 4.5 hours.
a. Press the clock key to adjust the time of clock
as shown.
b. Press the clock key three times and respectively
adjust hour, minute and week. Press +/- key to
adjust the specific parameters. After setting the
time, press the clock key and the clock setting
is ok. At this time, there is "1" before the time
displayed in the screen.
Press the timing key to set the alarm time,
and the cleaner will automatically work as
per the set specified time with the specific
operating methods:
a. Press timing key to set the hour. It can
be adjusted by the key +/-.
b. Press timing key again to set the minutes.
It can be adjusted by the key +/-.