Nortel 2500 Series System Configuration Manual page 10

10 Contents
no autosave enable command 207
default autosave enable command 207
Setting time on network elements using Simple Network Time Protocol 208
show sntp command 208
sntp enable command 209
no sntp enable command 209
sntp server primary address command 209
sntp server secondary address command 210
no sntp server command 210
sntp sync-now command 211
sntp sync-interval command 211
default sntp command 212
Setting local time zone 212
clock time-zone 213
no clock time-zone 213
clock summer-time 213
no clock summer-time 214
show clock time-zone 214
show clock summer-time 215
Enabling Autopology 215
autotopology command 216
no autotopology command 216
default autotopology command 216
show autotopology settings 216
show autotopology nmm-table 217
Configuring LLDP using the CLI 217
lldp command 218
default lldp command 219
lldp config-notification command 219
no lldp config-notification command 220
default lldp config-notification command 220
lldp tx-tlv command 221
no lldp tx-tlv command 221
default lldp tx-tlv command 222
lldp status command 222
no lldp status command 223
default lldp status command 223
show lldp command 224
show lldp port command 226
Configuring LEDs to blink on the display panel 229
Upgrading software 229
download command 230
Copyright © 2007, Nortel Networks
.
Nortel Ethernet Routing Switch 2500 Series
Overview - System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007