General Settings; Recalibrating The Touch Screen; Calibration Screen - Jensen VX3014 Operation Manual

General Settings

1. Touch [ General ], if necessary.
2. Touch to highlight a setting to display/select an option.
General settings Options
USA/Asia/Japan/Europe/Eur LW/
Radio region
Oirt
Local
Radio range
Distance
On
Beep
Off
Calibration Start
On
Demo
Off
4. Touch the " < " Back arrow in the upper left corner of the display to exit.
Calibration
Calibrate the touch screen using the calibration setting function.

Recalibrating the Touch Screen:

1. Press the [ Calibration ] option on the setup menu to enter.
2. Touch [ Yes ] to enter.
3. Press and hold the center of [ + ] for 5 seconds, the [ + ] will move automatically.
4. Aim at center of [ + ], follow the path as shown in the figure. Once steps 1-4 are
complete the system will automatically exit calibrating mode.
Description
Select one that matches your location.
Select Local to receive only stations with extremely
strong signal.
Turn-ON the beep sound. Each time you press a button,
the unit beeps.
Turn-OFF the beep sound.
Calibrate the touch screen.
Turn-ON Retail Demo Mode.
Turn-OFF Retail Demo Mode

Calibration Screen