Connecting Audio; Connecting Analog Audio Devices - HP elite usb-c User Manual

Connecting audio

You can connect headphones or speakers directly into the audio-in (headphone)/audio-out (microphone)
combo jack on the docking station. You can also connect analog audio devices.
NOTE: If the audio does not automatically switch to the docking station, set the docking station as the
default audio device in your computer settings.

Connecting analog audio devices

To connect analog audio:
1. Connect one end of an audio Y-cable (purchased separately) to the audio-out (headphone)/audio-in
(microphone) combo jack on the docking station.
2. Connect the other end to the red and white audio-in jacks on your television or stereo equipment. See
your television or stereo equipment user guide for the jack names and locations.
14 Chapter 2 Using the docking station