Nortel 5100 User Manual page 27

Step
1
2
Copyright © 2007, Nortel Networks
.
Accessing and modifying the LAN Network Settings 27
Action
From Main Menu, select Settings > Profile > LAN > Settings >
Network Settings, and press OK to accept.
Select the appropriate configuration options and set network
parameters (specific to your network configuration) for the LAN
connection profile:
a. Details: Displays the network configuration parameters (MAC
address, DHCP, IP address, Subnet Mask, Gateway and DNS)
as currently configured on the IP Phone 1535.
b. DHCP: Used to configure DHCP server information (for
DHCP-enabled network environments) or static IP Address
information (for DHCP-disabled network environments).
DHCP must be disabled to access further configuration options
(IP Address, Subnet Mask, Gateway, and DNS1/DNS2
options). If you enable DHCP, these options are automatically
configured (through the network DHCP server) after the IP
Phone 1535 connects to the network.
If manually configuring the DHCP options, the IP Phone 1535
attempts to connect to the network using the parameters
you set. Should a connection failure occurs when using your
manual DHCP values, the IP Phone 1535 retains its current
configuration values. Check your values for correctness and
retry the connection.
c. IP Address: View or change network IP address information.
d. Subnet Mask: View or change the Subnet Mask information.
e. Gateway: View or change the default Gateway Address
information.
f. DNS1/DNS2: View or change the primary (DNS1) and
secondary (DNS2) Domain Name Servers.
For changes made in any of these configuration options to take effect,
you must hit Back to return to the previous menu, and select Apply every
time you make a change.
Nortel Multimedia Communications Server 5100
Nortel IP Phone 1535 Installation and Commissioning
NN43160-300 00.13 Preliminary
Release 4.0 22 August 2007
ATTENTION
—End—