Cold Weather Operation (Below -22°F Or −30°C); Extended Park Starting - Chrysler 2017 Pacifica Owner's Manual

384 STARTING AND OPERATING
2. Press and hold the brake pedal while pushing the
ENGINE START/STOP button once.
3. The system takes over and attempts to start the
vehicle. If the vehicle fails to start, the starter will
disengage automatically after 10 seconds.
4. If you wish to stop the cranking of the engine prior to
the engine starting, push the button again.
ENGINE START/STOP Button Functions — With Driv-
er's Foot OFF The Brake Pedal (In PARK Or NEUTRAL
Position)
The ENGINE START/STOP button operates similar to an
ignition switch. It has four positions, OFF, ACC, RUN
and START. To change the ignition positions without
starting the vehicle and use the accessories follow these
steps:
• Starting with the ignition in the OFF position,
• Push the ENGINE START/STOP button once to place
the ignition to the ACC position (EVIC/DID will
display "ACC"),
• Push the ENGINE START/STOP button a second time
to place the ignition to the RUN position (EVIC/DID
will display "ON/RUN"),
• Push the ENGINE START/STOP button a third time to
return the ignition to the OFF position (EVIC/DID will
display "OFF").
Cold Weather Operation (Below –22°F Or −30°C)
To ensure reliable starting at these temperatures, use of
an externally powered electric engine block heater (avail-
able from your authorized dealer) is recommended.

Extended Park Starting

NOTE: Extended Park condition occurs when the vehicle
has not been started or driven for at least 30 days.