Ryobi P214 Operator's Manual

Ryobi P214 Operator's Manual

18 volt hammer drill
Hide thumbs Also See for P214:

Advertisement

OPERATOR'S MANUAL
MANUEL D'UTILISATION
MANUAL DEL OPERADOR
18 VOLT HAMMER DRILL
PERCEUSE À PERCUSSION
DE 18 V
TALADRO DE PERCUSIÓN
DE 18 V
P214
INCLUDES: Hammer Drill, Auxiliary Handle
Assembly,
Depth Stop Rod,
Manual

TABLE OF CONTENTS

****************
........................................................2-3
 Symbols ..............................................4
 Features ..............................................5
 Assembly ............................................ 5
 Operation .........................................6-9
 Maintenance ....................................... 9
 Illustrations ..................................10-11
 Parts Ordering and Service
............................................Back page
WARNING:
To reduce the
risk of injury, the user must read and
understand the operator's manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
INCLUT : Perceuses à percussion, poignée
auxiliaire,
Operator's
manual del utilisation
TABLE DES MATIÈRES
 Avertissements de sécurité générales
relatives aux outils électriques ........2-3
 Avertissements de sécurité relatifs
perceuses à percussion ..................... 3
 Symboles ............................................4
 Caractéristiques ................................. 5
 Assemblage ........................................ 5
 Utilisation ........................................6-9
 Entretien .............................................9
 Illustrations ..................................10-11
 Commande de pièces et dépannage
......................................... Page arrière
AVERTISSEMENT :
réduire les risques de blessures,
l'utilisateur doit lire et veiller à bien
comprendre le manuel d'utilisation avant
d'employer ce produit.
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
tige de butée de profondeur,
****************
Pour
INCLUYE: Taladros de impacto, mango
auxiliar,
barra limitadora de profundidad,
manual del operador
ÍNDICE DE CONTENIDO
****************
 Advertencias de seguridad para
herramientas eléctrica ................... 2-3
 Advertencias de seguridad de
taladros de impacto ...........................3
 Símbolos ............................................4
 Características ...................................5
 Armado ..............................................5
 Funcionamiento ............................. 6-9
 Mantenimiento ...................................9
 Illustraciones .............................. 10-11
 Pedidos de piezas y servicio
......................................Pág. posterior
ADVERTENCIA:
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
Para reducir

Advertisement

Table of Contents
loading

Summary of Contents for Ryobi P214

  • Page 1: Table Of Contents

    MANUAL DEL OPERADOR 18 VOLT HAMMER DRILL PERCEUSE À PERCUSSION DE 18 V TALADRO DE PERCUSIÓN DE 18 V P214 INCLUDES: Hammer Drill, Auxiliary Handle INCLUT : Perceuses à percussion, poignée INCLUYE: Taladros de impacto, mango auxiliaire, tige de butée de profondeur,...
  • Page 2: General Power Tool Safety Warnings

    GENERAL POWER TOOL SAFETY WARNINGS  Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, WARNING non-skid safety shoes, hard hat, or hearing protection Read all safety warnings and all instructions. Failure to used for appropriate conditions will reduce personal follow the warnings and instructions may result in electric injuries.
  • Page 3: Drill-Driver Safety Warnings

    GENERAL POWER TOOL SAFETY WARNINGS  Keep cutting tools sharp and clean. Properly maintained screws, or other small metal objects, that can make a connection from one terminal to another. Shorting cutting tools with sharp cutting edges are less likely to the battery terminals together may cause burns or a fire.
  • Page 4: Symbols

    SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, will result DANGER: in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could result WARNING: in death or serious injury.
  • Page 5: Features

    FEATURES PRODUCT SPECIFICATIONS Torque ..............in.lb. No Load Speed .......0-375/0-1,600 r/min. (RPM) Clutch..............24 position Hammer Speed (Blows per minute) ........... 0-5,600/0-24,000 BPM ASSEMBLY UNPACKING INSTALLING/ADJUSTING THE AUXILIARY HANDLE ASSEMBLY This product requires assembly. See Figure 1, page 10.  Carefully remove the tool and any accessories from the box.
  • Page 6: Operation

    OPERATION DIRECTION OF ROTATION SELECTOR WARNING: (FORWARD/REVERSE/CENTER LOCK) See Figure 2, page 10. Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second Set the direction of rotation selector in the OFF (center lock) is sufficient to inflict serious injury.
  • Page 7: Operation

    OPERATION QUICK MODE SELECTOR WARNING: See Figure 7, page 11. The Quick Mode Selector allows you to quickly switch from Do not hold the chuck sleeve with one hand and use drill mode to drive mode. the power of the drill to tighten the chuck jaws on the drill bit.
  • Page 8 OPERATION ADJUSTING THE AUXILIARY HANDLE  Use LOW (1) speed for high torque applications and HIGH (2) speed for fast drilling or driving applications. ASSEMBLY Refer to Two-Speed Gear Train and Adjusting Torque. See Figure 9, page 11.  Secure the workpiece in a vise or with clamps to keep it To adjust the auxiliary handle assembly: from turning as the bit rotates.
  • Page 9: Maintenance

    OPERATION WOOD AND METAL DRILLING • Bend or burn bits; and • Produce off-center or irregular-shaped holes. For maximum performance, use high speed steel bits for  When drilling large holes in metal, start with a small bit, wood or metal drilling. Select drilling mode. Begin drilling then finish with a larger bit. at a very low speed to prevent the bit from slipping off the starting point.
  • Page 10: Illustrations

    P214 A - Keyless chuck (mandrin sans clé, portabrocas de apriete sin llave) B - Torque adjustment ring (bague de réglage du couple, anillo de ajuste de fuerza de torsión) C - Quick mode selector (sélecteur de mode rapide, selector de modo rápido)
  • Page 11 Fig. 6 Fig. 9 A - Two-speed gear train [HIGH (2) – LOW (1)] [train d’engrenages à deux vitesses (haute et basse, engranaje de dos velocidades (alta- baja)] B - Low speed (basse vitesse, velocidad baja) C - High speed (haute vitesse, velocidad alta) Fig.
  • Page 12: Utilisation

    Please obtain your model and serial number from the product data plate. MODEL NUMBER _______________ SERIAL NUMBER ____________________________ RYOBI is a registered trademark of Ryobi Limited and is used pursuant to a license granted by Ryobi Limited. Pour faire une demande de réparations ou obtenir des pièces de rechange, trouver un Centre de réparations agréé...

Table of Contents