NordicTrack NTL2295.0 User Manual page 9

8. Press the right Upright Cover (75) onto the right Upright
(20). Attach the Upright Cover with a Cover Screw (90).
Repeat this step on the other side (not shown).
9. Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen
wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 31). To protect the
floor or carpet from damage, place a mat under the treadmill.
8
9
20
75
90