Table of Contents
Advertisement
Radio Operations
store individual radio stations in memory.
Press the corresponding [1]~[6] button
to recall the stored radio frequency
automatically.
Manual store
1. Long press [1]~[6] button to store the
current station into preset memory.
Band scan
Band scan is searching for good
reception stations from current frequency
to higher frequency repeatedly. When a
good reception stations is searched, it will
be listened in 7s. And then it continues
scan.
1. Press [BND] button to select a band.
2. Long press [BND] button.
CD/MP3/WMA Operations
This unit can play back MP3/WMA files.
Note:
• If you play a file with DRM (Digital Rights
Management) for WMA remaining ON, no
audio is output. Instead, "– –:– –" will blink
for 5s in the play time, and then go to the
next track to play.
To disable DRM (Digital Rights
Management)
When using Windows Media Player
9/10/11, click on TOOL
MUSIC RECORD tab, then under
Recording settings, unclick the Check
box for RECORD PROTECTED MUSIC.
Then, reconstruct files.
Personally constructed WMA files are
used at your own responsibility.
Precautions when creating
MP3/WMA file
Usable sampling rates and bit rates
1. MP3: Sampling rate 8 kHz-48 kHz,
Bit rate 32 kbps-384 kbps/VBR
2. WMA: Sampling rate 22.05 kHz-48
kHz,Bit rate 32 kbps-320 kbps/VBR.
OPTIONS
Auto store
Auto store is a function for storing up to 6
stations that are automatically tuned in
sequentially. If 6 receivable stations
cannot be received, a previously stored
station remains unover written at the
memory position.
AUTO STORE
"
1. Select
items.
2. Long press [ROTARY] knob.
The stations with good reception are
stored automatically to the preset
channels.
∗ If auto store is performed in the FM bands,
the stations are stored in FM3.
If auto store is performed in the AM bands,
the stations are stored in AM2.
File extensions
1. Always add a file extension ".MP3" or
".WMA" to MP3 or WMA file by using
single byte letters. If you add a file
extension other than specified or forget
to add the file extension, the file cannot
be played.
2. Files without MP3/WMA data will
extension ".MP3" or ".WMA" will not
play. Instead, "– –:– –" will blink in the
play time.
∗ When MP3/WMA files are played, a little
no sound part is caused between tunes.
Logical format (File system)
1. When writing MP3/WMA file on a
CD-R disc or CD-RW disc, please
select "ISO9660 level 1, 2 or JOLIET or
Romeo" or APPLE ISO as the writing
software format. Normal play may not
be possible if the disc is recorded on
another format.
2. The folder name and file name can
be displayed as the title during MP3/
WMA play but the title must be within
64 single byte alphabetical letters and
numerals (including an extension).
CZ215A/CZ315A
"
in system setup
15
Advertisement
Table of Contents
