TRENDnet TK-804R Quick Installation Manual page 9

Hot-Key Commands
A keyboard hot-key command consists of at least three keystrokes:
Hot Key command = Scroll Lock + Scroll Lock + Command key(s)
After pressing the Scroll Lock key, you have 2 seconds to press the
again. You then have another 2 seconds to press a command key. A beep confirms that
the KVM switch is in "Hot-Key" mode. If you do not press a key within 2 seconds, the
switch will exit hot-key mode.
To select a specific PC port:
Scroll Lock
Select PC =
For example, to select port 1 on the 1st KVM switch, you hit the following key
sequence.
Scroll Lock
Select PC =
For example, to select port 08 of the 8 KVM switch on a series of daisy-chained
TK-804R's you hit the following key sequence:
Scroll Lock
Select PC =
Note: When using the KVM switch standalone, do not enter the bank number. For
example, to select port 1 on the KVM switch you hit the following key sequence.
Scroll Lock
Select PC =
For a list of all the Hot Key commands, please see the Quick Reference Sheet.
Scroll Lock +
+
Scroll Lock +
+
th
Scroll Lock +
+
Scroll Lock +
+
7
Scroll Lock
Bank number
A + B +
Y
Port number
0 + 1 + 0
0 + 8 + 0
0 + 1
key
+
Z
+
1
+ 8