NordicTrack A2050 NTL10850 User Manual page 23

THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also al-
lows you to select miles or kilometers as the unit of
measurement and to turn on and turn off the demo
mode.
To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown in the display:
The upper left
area of the dis-
play will show the
total number of
hours that the
treadmill has
been used. The
lower center of
the display will
show the total number of miles (or kilometers) that the
walking belt has moved. An "E" for English miles or an
"M" for metric kilometers will appear in the upper right
area of the display. Press the Speed increase button to
change the unit of measurement.
IMPORTANT: If a "d" appears in the upper center of
the display, the console is in the "demo" mode. This
mode is intended to be used only when a treadmill is
displayed in a store. When the console is in the demo
mode, the power cord can be plugged in, the key can
be removed from the console, and the indicators in the
display will automatically light in a preset sequence, al-
though the buttons on the console will not operate. If a
"d" appears when the information mode is selected,
press the Speed decrease button so "d" disap-
pears.
To exit the information mode, remove the key from the
console.
Hours
Miles
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor adds even more fea-
tures to the console. The chest pulse sensor offers
hands-free operation, and enables you to use the con-
sole's two heart rate programs. To purchase the op-
tional chest pulse sensor, call toll-free 1-888-825-
2588.
23