Bench Overview & Dimensions - Cap Strength FM-504 Assembly Manual

Thank you for selecting your CAP Strength
product. This bench will help you build and tone
major muscle groups in the body. Please read
this manual carefully before using your bench.
please look at diagram below to
get familiar will your new bench.
For your benefit, read this manual carefully
before using the product. If you have
questions after
ASSEMBLED DIMENSIONS:
Height: 40.2 in. / 102 cm
Width: 25.6 in. / 65 cm
Depth: 49.2 in. / 125 cm
TOOLS NEEDED
Make Things Easier for Yourself
This manual is designed to ensure that the
weight bench can be assembled successfully by
anyone. Most people find that by setting aside
plenty of time, assembly will go smoothly.
Before beginning assembly, carefully read the
following information and instructions:
•
Assembly requires two people.
•
For help identifying small parts, see the PART
IDENTIFICATION CHART.
•
Tighten all parts as you assemble them, unless
instructed to do otherwise.
•
As you assemble this product, make sure all
parts are oriented as shown in the drawings.
reading this manual, call 877-227-0955. To help
assist you, please note the product model
number before calling. The model number is
FM-504 or FM-TN504
Before reading further, please look at the
drawing below and familiarize yourself with the
parts that are labeled.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
The following tools (not included) may be
required for assembly:
•
Two adjustable wrenches
•
One hammer
•
One standard screwdriver
•
One Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
- 3 -