Fade In/Fade Out Function; Wind Noise Reduction Function - Panasonic NV-GS90 Operating Instructions Manual

Fade in/fade out function

Fade in
The image and audio gradually appear.
Fade out
The image and audio gradually disappear.
≥Set to Tape Recording Mode.
1
Press the joystick to display the icon. Move
the joystick down until icon 1 appears.
2
Move the joystick left to select the fade icon
[ ].
≥The [FADE ON] indication appears on the
screen of the movie camera.
3
Press the recording start/stop button.
Start recording. (fade in)
When you start recording, the image/audio
disappears completely and the image/audio
gradually appears.
Pause recording. (fade out)
The image/audio gradually disappears. After the
image/audio completely disappears, recording
stops.
ª
To cancel fading
Select the [ ] icon again.
≥The [FADE OFF] indication appears on the
screen of the movie camera.
24
LSQT1290
Record mode
1
ª
To select the colour for fade in/out
The colour which appears in fading pictures can
be selected.
1
Set [ADVANCED] >> [FADE COLOUR] >>
[WHITE] or [BLACK].
≥While the fade in/fade out function is selected, it
takes several seconds to display the image
when you start recording images. Besides, it
also takes several seconds to pause recording.

Wind noise reduction function

This reduces the wind noise coming into the
microphone when recording.
≥Set to Tape Recording Mode.
1
Set [BASIC] >> [WIND CUT] >> [ON].
ª
To cancel the wind noise reduction
function
Set [BASIC] >> [WIND CUT] >> [OFF].
≥The default setting is [ON].
≥Reduces the wind noise depending on the wind
strength. (If this function is activated in strong
winds, the stereo effect may be reduced. When
the wind weakens, the stereo effect will be
restored.)