NordicTrack NTEVEL59011 User Manual page 15

Ntevel59011
Table of Contents

Advertisement

Measure your heart rate if desired.
5
Note: If you wear the chest pulse sensor and
hold the handgrip pulse sensor at the same
time, the console may not display your heart
rate accurately.
If there are thin
sheets of plas-
tic on the
metal contacts
on the hand-
grip pulse sen-
sor, peel off
the plastic. To
use the hand-
grip pulse sensor, place your hands on the metal
contacts. Your palms must be on the upper con-
tacts and your fingers must be touching the lower
contacts. Avoid moving your hands. When your
pulse is detected, the heart-shaped indicator in
the display will flash each time your heart beats.
After a moment, two dashes (– –) will appear and
then your heart rate will be shown.
For the most accurate heart rate reading, continue
to hold the handgrips for about 15 seconds. Note:
When you first hold the handgrips, the display will
Metal
show your heart rate continuously for 15 seconds.
Contacts
The display will then show your heart rate along
with the other feedback modes.
When you are finished exercising, the console
6
will automatically turn off.
If the pedals are not moved and the console but-
tons are not pressed for a few minutes, the con-
sole will automatically turn off to conserve the
batteries.
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cxt 910

Table of Contents